Mt300 Macrofan Autolevel Plastic Activator

MT300 Macrofan Autolevel Plastic Activator boosts adhesion of Macrofan AP Autolevel Primer on hard exterior plastics like PP, PP/EPDM, ABS, PC, PA, PVC, UP‑GF, PBT, R‑TBU, SMC and PUR. Use together with MH300 Macrofan Plastic Primer hardener. Typical mix: 1000 g primer + 180 g MH300 + 500 g MT300. Viscosity 20–22” DIN4 at 20°C. Pot life 90 min (20°C). Spray nozzle 1.2–1.4 mm. Coats: 1 or ½+1; film 30–50 µm; flash 15–30 min. See Technical Data Sheet for full instructions and safety info. No variant-specific differences. This SKU is the standard Mt300 Macrofan Autolevel Plastic Activator. See the product Technical Data Sheet for application, mixing ratios and pot life.