EL010 Energy Spray Line Plastic Primer

Lechler EL010 Energy Spray Line Plastic Primer is a ready-to-use, one-pack aerosol primer formulated for most plastic substrates. Not suitable for polyethylene (PE). Designed for fast-repair cycles, it can be overcoated with Lechler fillers and topcoats without sanding after flash-off. Shake 2–3 minutes before use. Spray at 15–30°C, holding 20–25 cm from the surface; apply a single cross coat (recommended film thickness 5–10 µm). Air dry at 20°C for 20–30 minutes. 400 ml aerosol can — ready-to-use one-pack plastic primer in aerosol form. Suitable for most plastics; not for polyethylene (PE).